Model NO.: pipe fittings flange BTF-FL-056
Manufacturing Way: Forging
Name: Pipe Fittings Flange ANSI DIN GOST Flange
Shipment Term: by Sea or by Air
Surface: Rust Oil or Painting
Pressure: 150lbs-2500lbs
Quality Control: TUV SGS
Quality Certificate: Material Test Report Dimension Report
Certificate: Forma Forme Co
Carbon Steel Flange: A105 A105n Q235 St37.2 16mn 20mn 20# Steel C22.8
Stainless Steel Flange: SS316 SS316L SS304 SS304L
Alloy Steel Flange: 16mo3 13crmo4-5 15CrMo P250gh
Trademark: BTF or as request
Transport Package: Ply Wooden Cases or Pallet
Specification: 1/2"-80"
Origin: China
HS Code: 73079100
Model NO.: pipe fittings flange BTF-FL-056
Manufacturing Way: Forging
Name: Pipe Fittings Flange ANSI DIN GOST Flange
Shipment Term: by Sea or by Air
Surface: Rust Oil or Painting
Pressure: 150lbs-2500lbs
Quality Control: TUV SGS
Quality Certificate: Material Test Report Dimension Report
Certificate: Forma Forme Co
Carbon Steel Flange: A105 A105n Q235 St37.2 16mn 20mn 20# Steel C22.8
Stainless Steel Flange: SS316 SS316L SS304 SS304L
Alloy Steel Flange: 16mo3 13crmo4-5 15CrMo P250gh
Trademark: BTF or as request
Transport Package: Ply Wooden Cases or Pallet
Specification: 1/2"-80"
Origin: China
HS Code: 73079100
13CRMO4-5 pipe fittings flange ansi din gost flange
Threaded flange
Threaded Flanges are also known as screwed flange, and it is having a thread inside the flange bore which fits on the pipe with matching male thread on the pipe. This type of joint connection is Speedy and simple but not suitable for high presser and temperature applications. Threaded Flanges are mostly used in utility services such as air and water.
Blind Flanges
The blind flange is a blank disc with bolt hole. These types of flanges are used with another type of flange to isolate the piping system or to terminate the piping as an end. Blind flanges are also used as a manhole cover in the vessel.
Slip on flanges 
Slip-On flange has a hole with matching outside diameter of pipe from which pipe can pass. The flange is placed on pipe and fillet welded from both inside and outside. Slip-On Flange is suitable for low pressure and temperature application. This type of flange is available in large size also to connect big bore piping with storage tank nozzles. Normally, these flanges are of forged construction and are provided with the hub. Sometimes, these flanges are fabricated from plates and are not provided with the hub.
Weld neck flange
Weld neck flange are most widely used flanged in process piping. It gives the highest level of joint integrity due to Butt-welded with a pipe. These types of flanges are used in high pressure and temperature application. Weld neck flanges are Bulky & costly with respect to other types of flange.
 

Production instructions
We can produce Amercian Standard, German Standard, Italian Standard, European Standard, Chinese Standard flanges, also offer all kinds of non-standard flanges according to you drawings, diameter ranging from DN15 to DN3000, press rate up to 2500LBS. Flanges are made of carbon steel, stainless steel, alloy steel, duplex ferric-austenitic steel.


Flange Standard
American Standard ASME B16.5,ASME B16.47,ANSI B16.5,API605,AWWA C207
Japanese Standard JIS / KS 5K / 10K / 16K / 20K / 30K
German Standard DIN2527,2528,2561,2565,2566,2573,2576,2627-2638,2641,2642,2655,2656,2673,86029
British Standard BS4504 PN16 / 25 / 40,BS10 TABLE E / TABLE D
Italian Standard UNI 2253,2254,2276,2278,2281,6084-6093
China Standard GB/T 13402-92,GB/T9112-9124-2000,HG5010-5028
Flange Material 
Carbon steel :
ASTM A105, ASTM A350 LF1,LF2,S235JR,P245GH,C22.8,P250GH,P280GH,16MN,20#steel.
Stainless steel :
ASTM A182 F304/304L,F316/316L.
Alloy steel :
ASTM A182 F11,F12,16Mo3,13CrMo4-5,15CrMo,1.7335.
Inspection 
factory inspection in workshop , the third party inspection SGS,3.1 certificate , MTC etc.
Production Process

13crmo4-5 Pipe Fittings Flange ANSI DIN GOST Flange
Equipment Exhibition

13crmo4-5 Pipe Fittings Flange ANSI DIN GOST Flange
Product Show

13crmo4-5 Pipe Fittings Flange ANSI DIN GOST Flange
13crmo4-5 Pipe Fittings Flange ANSI DIN GOST Flange

Quality Assurance-TUV Certificate
13crmo4-5 Pipe Fittings Flange ANSI DIN GOST Flange


Quality System Certificate:
We have Grade A Manufacture License of Special Equipment , Press Equipment Directive Quality-Assurance System Certificate , China Classification Society Certificate of Work Approval, TUV Certificate
Perfect Inspection Process:
Raw material inspection(5steps)- Raw materials testing is to ensure the raw material conforming to the order requirements.
Process testing(10steps)-Each processing step testing is to guarantee each step product qualified.
Factory testing(6steps)-Assure 100% product qualified rate to meet customer's requirements
Contact Us

13crmo4-5 Pipe Fittings Flange ANSI DIN GOST Flange
All products can be customerized designed . We will supply professional service within 24 hours .Welcome to contact Sales Director Cathy Liu .
 
 
13CRMO4-5 pipe fittings flange ansi din gost flange
Threaded flange
Threaded Flanges are also known as screwed flange, and it is having a thread inside the flange bore which fits on the pipe with matching male thread on the pipe. This type of joint connection is Speedy and simple but not suitable for high presser and temperature applications. Threaded Flanges are mostly used in utility services such as air and water.
Blind Flanges
The blind flange is a blank disc with bolt hole. These types of flanges are used with another type of flange to isolate the piping system or to terminate the piping as an end. Blind flanges are also used as a manhole cover in the vessel.
Slip on flanges 
Slip-On flange has a hole with matching outside diameter of pipe from which pipe can pass. The flange is placed on pipe and fillet welded from both inside and outside. Slip-On Flange is suitable for low pressure and temperature application. This type of flange is available in large size also to connect big bore piping with storage tank nozzles. Normally, these flanges are of forged construction and are provided with the hub. Sometimes, these flanges are fabricated from plates and are not provided with the hub.
Weld neck flange
Weld neck flange are most widely used flanged in process piping. It gives the highest level of joint integrity due to Butt-welded with a pipe. These types of flanges are used in high pressure and temperature application. Weld neck flanges are Bulky & costly with respect to other types of flange.
 

Production instructions
We can produce Amercian Standard, German Standard, Italian Standard, European Standard, Chinese Standard flanges, also offer all kinds of non-standard flanges according to you drawings, diameter ranging from DN15 to DN3000, press rate up to 2500LBS. Flanges are made of carbon steel, stainless steel, alloy steel, duplex ferric-austenitic steel.


Flange Standard
American Standard ASME B16.5,ASME B16.47,ANSI B16.5,API605,AWWA C207
Japanese Standard JIS / KS 5K / 10K / 16K / 20K / 30K
German Standard DIN2527,2528,2561,2565,2566,2573,2576,2627-2638,2641,2642,2655,2656,2673,86029
British Standard BS4504 PN16 / 25 / 40,BS10 TABLE E / TABLE D
Italian Standard UNI 2253,2254,2276,2278,2281,6084-6093
China Standard GB/T 13402-92,GB/T9112-9124-2000,HG5010-5028
Flange Material 
Carbon steel :
ASTM A105, ASTM A350 LF1,LF2,S235JR,P245GH,C22.8,P250GH,P280GH,16MN,20#steel.
Stainless steel :
ASTM A182 F304/304L,F316/316L.
Alloy steel :
ASTM A182 F11,F12,16Mo3,13CrMo4-5,15CrMo,1.7335.
Inspection 
factory inspection in workshop , the third party inspection SGS,3.1 certificate , MTC etc.
Production Process

13crmo4-5 Pipe Fittings Flange ANSI DIN GOST Flange
Equipment Exhibition

13crmo4-5 Pipe Fittings Flange ANSI DIN GOST Flange
Product Show

13crmo4-5 Pipe Fittings Flange ANSI DIN GOST Flange
13crmo4-5 Pipe Fittings Flange ANSI DIN GOST Flange

Quality Assurance-TUV Certificate
13crmo4-5 Pipe Fittings Flange ANSI DIN GOST Flange


Quality System Certificate:
We have Grade A Manufacture License of Special Equipment , Press Equipment Directive Quality-Assurance System Certificate , China Classification Society Certificate of Work Approval, TUV Certificate
Perfect Inspection Process:
Raw material inspection(5steps)- Raw materials testing is to ensure the raw material conforming to the order requirements.
Process testing(10steps)-Each processing step testing is to guarantee each step product qualified.
Factory testing(6steps)-Assure 100% product qualified rate to meet customer's requirements
Contact Us

13crmo4-5 Pipe Fittings Flange ANSI DIN GOST Flange
All products can be customerized designed . We will supply professional service within 24 hours .Welcome to contact Sales Director Cathy Liu .
 
 

Computer Control Electronic Universal Testing Machine is designed and manufactured according to ASTM, ISO,DIN etc standards. It is computer-controlled precision Testing Machine, suitable for wide range of material for tension compression, bending and shearing test. It has high stability as well as high precision, equipped with PC system& printer for graph, test result display, test control as set program, printing & data processing. Complete with modulus for metal, spring, textile, rubber, plastic and other material testing & creep test. It is widely used in many field used in many fields such as industry factories, mineral enterprise and high schools. 

Electronic Universal Testing Machine

Utm Machine,Electronic Universal Testing Machine,Laboratory Equipment,Electronic Testing Machine

Jinan Chenda Testing Machine Manufacturing Co., Ltd. , https://www.jncdtester.com