Automatic Large stator cnc coil winding machine  for three phase motor
(1) Machine function and characteristic
This motor stator winding machine is suitable for multi-connected and multi layer winding. It adopts special purpose controller which could set the function of arraying direction, winding start point, slow starting, slow ending, sides stop, auto width, auto reset, ect.
There are two alternate spindles to facilitate higher output.
This type of CNC coil winding machine is suitable for stators needs to do winding inserting by manual. The coil will be wound into the winding tooling then operator needs unload the coils mannually.
(2) Main Technical parameter:
Production name: | RX3A-550 large stator cnc coil winding machine |
Swing diameter: | ≤550mm |
Effective length of tooling: | ≤400mm |
Wire head: | 1pc |
Max stack height: | 300mm |
Max stator OD: | 210mm |
Max RPM: | 500RPM |
Power supply: |
220V/50/60Hz 2.2Kw |
Air pressure: | 0.4MPa |
Weight: |
300Kg |
Dimension: |
1360mm(L)*1300mm(W)*1280mm(H) |
(3) Application
This stator coil winding machine is specially designed for multiple wire parallel coil winding such as fan motor, air conditioner motor, alternator, servo motor ,pump motor and three phase motor.
Stator coil winding machine winding tooling: the coil be wound into the tooling shown as below page.
Â
Automatic Large stator cnc coil winding machine  for three phase motor
(1) Machine function and characteristic
This motor stator winding machine is suitable for multi-connected and multi layer winding. It adopts special purpose controller which could set the function of arraying direction, winding start point, slow starting, slow ending, sides stop, auto width, auto reset, ect.
There are two alternate spindles to facilitate higher output.
This type of CNC coil winding machine is suitable for stators needs to do winding inserting by manual. The coil will be wound into the winding tooling then operator needs unload the coils mannually.
(2) Main Technical parameter:
Production name: | RX3A-550 large stator cnc coil winding machine |
Swing diameter: | ≤550mm |
Effective length of tooling: | ≤400mm |
Wire head: | 1pc |
Max stack height: | 300mm |
Max stator OD: | 210mm |
Max RPM: | 500RPM |
Power supply: |
220V/50/60Hz 2.2Kw |
Air pressure: | 0.4MPa |
Weight: |
300Kg |
Dimension: |
1360mm(L)*1300mm(W)*1280mm(H) |
(3) Application
This stator coil winding machine is specially designed for multiple wire parallel coil winding such as fan motor, air conditioner motor, alternator, servo motor ,pump motor and three phase motor.
Stator coil winding machine winding tooling: the coil be wound into the tooling shown as below page.
Â
We supply tail pipes for special cars, such as Porsche, BMW, Mercedes Benz, Audi, Toyota etc. Customer`s design is welcomed, and we are capable to develop according to your requirments.
l Material: Stainless Steel 304, Carbon Fiber
l Finish: Mirror Polishing, Chrome, Powder Coating, Customized
l Color: Black, Blue, red, gold, silver, Customized
l Shape: round, oval, Square, irregular, Customized
Tips For Special Cars,Black Chromed Tips,Carbon Fiber Tips,Dual Exhaust Tips
JINING FAREAST LIANGFEI CONVERTER & MUFFLER CO. LTD , https://www.golbaltour.com