• Model NO.: Steering Gear
  • Certification: BV, CE, ISO9001, CCS, CCC
  • Condition: New
  • Turning Time: <28s
  • Navigation Area: Without Limited
  • Control Type: Manual Direction Valve, Electronic Control, Pump C
  • Working Pressure: 8 MPa - 17 MPa
  • Keywords: Steering Gear
  • Transport Package: Wooden Cases
  • Origin: Jiangsu
  • Type: Steering Gears/Shaft
  • Standard: Standard
  • Nominal Torque: 10-500kn.M
  • Turning Angle: 35 Degree
  • Drive: Electro-Hydraulic
  • Rudder Stock Diameter: 300mm - 900 mm
  • Design Pressure: 1.5 Kw - 20 Kw
  • Trademark: TRUST
  • Specification: CCS
  • HS Code: 8479891000
Hydraulic Ram Type Marine Steering Gear
 
Product Description

Hydraulic Ram Type Marine Steering Gear (four cylinders with twin piston and one tiller type) consists of two sets of reciprocating and fork type rudder mechanism, two sets of motor kinetic tank for oil pump, one reserve tank. Control mode, including electronic control, pump control, can be used together with any form of autopilot or follow-up pilot. To meet cunstomer's requirement, two sets of rudder mechanism, can be used together or separately. One of which fails to work, can be used separated to ensure normal work of steering control. It is widely used for ships with high safety performance such as large ship, oil tanker, liquefied-gas carrier, chemical tanker and etc.
 
NO. NOMINAL TORQUE (kN.m) A B C CENTER HEIGHT H1 H2
TILLER THICKNESS
h

STEERING RADIUS
R                           

RUDDER  DIA.        
D                            

1
320-400 3270 1470 3030 530 1010 500 450 ≤340
2 500-630 3610 1572 3400 560 1040 560 500 ≤420
3 700-800 3914 1740 3600 560 1053 740 570 ≤420
4 900-1000 4300 1910 3800 560 1070 800 600 ≤450
Hydraulic RAM Type Marine Steering GearHydraulic RAM Type Marine Steering Gear
Hydraulic RAM Type Marine Steering Gear
Hydraulic RAM Type Marine Steering Gear
Hydraulic RAM Type Marine Steering Gear
Hydraulic RAM Type Marine Steering Gear
 Note: the datas in table are just for reference, we could design and recommend correct model according to client's requirements, if you have no idea, just send us your ship or project information, we could help you.Â