| SAT REF:SND2091 | Starter,12V, 2.0KW, 11T, CW |
|---|---|
| Voltage (V) | 12 |
| Kilowatt (kW) | 2.0 |
| Teeth | 11 |
| Rotation | CW |
Applications:
TOYOTA Cressida
Camry, Celica
Replaces:
| LESTER | 19093 |
| OEM | 28100-45020 |
| OEM | 028401-4660 |
| OEM | 028000-4343 |
| OEM | 028000-6350 |
| OEM | 028000-7260 |
| SAT REF:SND2091 | Starter,12V, 2.0KW, 11T, CW |
|---|---|
| Voltage (V) | 12 |
| Kilowatt (kW) | 2.0 |
| Teeth | 11 |
| Rotation | CW |
Applications:
TOYOTA Cressida
Camry, Celica
Replaces:
| LESTER | 19093 |
| OEM | 28100-45020 |
| OEM | 028401-4660 |
| OEM | 028000-4343 |
| OEM | 028000-6350 |
| OEM | 028000-7260 |
The standing seam roof panels have a fxing or seaming method by turning up the edges of two adjacent panels, and then folding or interlocking them. This type of roof are used a lot for workshop with long panel.Compared with screw joint roof panel,the installation of standing seam roof panel is better.After a long time,the screw joint roof panel maybe will get rust where the screw fix,this type roof,no need to worry about that.
Our standing seam roof machine is composed with Manual Decoiler,feeding table,main forming machine,automatic cutting.
The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously
Standing Seam Roof Roll Forming Machine
Standing Seam Roof Roll Forming Machine,Roof Panel Roll Forming Machine,Steel Sheet Roll Forming Machine,Standing Seam Roof Panel Roll Forming Machine
Botou Golden Integrity Roll Forming Machine Co.,Ltd , http://www.jcxsteelrollformer.com