**Used Motor Oil Cleaning Recycling Machine - Vacuum Oil Distillation Unit** **Model No.:** JZC **Working Vacuum (MPa):** -0.08 to -0.099 **Working Pressure (MPa):** Less than or equal to 0.4 **Working Temperature:** 80°C to 350°C **Heating Method Options:** Electric or Boiler **Recovery Ratio:** Above 85% **Trademark:** NAKIN **Transport Package:** Wooden Case **Specification:** Carbon Steel and Stainless Steel **Origin:** Chongqing, China (Mainland) **HS Code:** 8421229090 --- **Application:** The JZC series waste oil distillation (oil pyrolysis) equipment is a specialized machine that combines atmospheric and vacuum distillation systems. It is designed for the efficient distillation and regeneration of black waste oil, including used engine oil, lubricating oil, hydraulic oil, gear oil, dirty diesel oil, and mixed oils. With a processing capacity of up to 6,000 tons, this system uses two stages of vaporization, along with an atmospheric tower and a vacuum tower design. The JZC oil distillation machine effectively separates waste oil into gasoline, diesel, and lubricating base oil under vacuum-pyrolysis conditions. Operating at around 380°C in a vacuum environment, it breaks down hydrocarbon molecules and recombines them into valuable products like diesel and base oil. During the process, liquid waste oil transforms into oil gas in the vacuum distillation tower under high temperature, then condenses back into liquid oil after passing through the oil and water cooling systems. The final product includes clean gasoline, diesel, and base oil, depending on the original composition of the waste oil. Throughout the distillation process, the JZC machine efficiently removes impurities such as wear debris, asphalt, wax, moisture, acids, carbon particles, and deep oxides, resulting in a high-quality, clear final oil. This makes the JZC machine ideal not only for large-scale oil refineries but also for small oil companies looking to produce their own refined oil. --- **Technical Parameters:** [Image: Used Motor Oil Cleaning Recycling Machine Vacuum Oil Distillation Unit] [Image: Flow Chart of the Distillation Process] **Features:** 1. No chemicals or activators are added during the distillation process; it follows a pyrolysis method. 2. The regeneration process occurs under high-temperature distillation (80°C to 580°C), converting oil from a liquid to a gaseous state. Different temperatures yield different densities of diesel fuel and base oil (light and heavy). 3. The JZC machine is environmentally friendly, producing minimal sludge composed of pure carbon materials without any oil, which can be repurposed as carbon toner for printing. 4. Heating options include electric heaters (for 2-ton and 5-ton capacities) and boilers (fuel, natural gas, or coal, suitable for 10-ton, 20-ton, or larger capacities). --- **Advantages:** 1. Flexible heating methods available—boiler using fuel, natural gas, or coal, and electric heating for smaller capacities. 2. High vacuum distillation reduces operating temperature, saving energy and improving safety. 3. Specialized chemicals are used to catalyze the waste oil, ensuring the final products have good anti-oxidation properties, a clear color, and no bad odor. These oils can be stored for one year without degradation. 4. The oil cooler system is made of SS304 stainless steel, offering excellent heat exchange performance and a long service life. 5. Environmentally friendly, with only 5–8% residual oil in the distillation kettle, which can be used as boiler fuel, eliminating pollution. 6. High purity of the final oil, with gasoline, diesel, and base oil stored separately in different tanks. 7. Designed for a 10-year lifespan, ensuring long-term reliability. 8. Easy to operate, requiring only 1–2 workers to manage the machine. --- **Different Temperatures and Stages:** 1. **Step 1:** Heat the oil to 80°C–110°C at 0.098 MPa vacuum to remove water and some light fractions. 2. **Step 2:** Increase the temperature to 120°C–210°C at 500 Pa vacuum to extract gasoline and diesel. 3. **Step 3:** Raise the temperature to 220°C–290°C at 300 Pa vacuum to obtain SN100 base oil. 4. **Step 4:** Continue heating to 300°C–350°C at 200 Pa vacuum to produce SN150 base oil. 5. **Step 5:** For improved clarity, add 2–3% clay to the SN100 and SN150 base oils, mix, and heat to 120°C before filtering through a press filter. --- **Packaging & Shipping:** 1. One **Used Motor Oil Cleaning Recycling Machine Vacuum Oil Distillation Unit** is packed in a wooden case. 2. The wooden case is suitable for both sea and air transportation. --- **Company Introduction:** Nakin Electromechanical Co., Ltd is a leading manufacturer of high-quality machinery, specializing in transformer oil purifiers, turbine oil purifiers, lube oil filtration systems, and engine oil regeneration machines. With strong technical expertise and extensive experience in vacuum oil purification, our machines have been exported to many countries and serve various industries globally. --- **Our Products Include:** - Environment-friendly vacuum waste oil distillation plant - High-efficiency vacuum transformer oil purifier - Double-stage insulating oil purifier - Mobile/trailer-type transformer oil treatment unit - Air dryer for electrical equipment - Turbine oil purifier - Coalescence and separation oil filter - Lubricating oil purifier/hydraulic oil purifier - Phosphate ester fire-resistant oil purifier - Engine oil regeneration system - Transformer oil regeneration device - Plate pressure oil filter - Portable oil purifier/filter - BDV oil tester - Oil moisture sensor --- **Office:** [Image: Company Office] --- **Certificates and Honors:** - China Famous Brand Oil Purifier Company - Golden Supplier for China National Electric Power Group - Golden Supplier for ALSTOM, SIEMENS, SCHNEIDER - ISO9001 Quality Certificate - CE Safety Certificate - SGS Local Testing Report - AAA Credit Rating Certificate - Over 15 years of exporting experience across 100+ countries --- **After-sales Service:** - Free training for installation and operation - Engineers available for local installation - 24-month warranty from delivery date - 24-hour online support - Overseas engineers available for after-sales service - Spare parts and service guaranteed for one year upon shipment - All patented parts offer free old-for-new replacement throughout their lifetime (excluding user damage) --- **How to Contact Us?** - **Contact Person:** Jerry Tan - **Phone:** +86-18223358936 - **Company Name:** Chongqing Nakin Electromechanical Co., Ltd - **Address:** Luohuang Industrial Park Area B, Luohuang, Jiangjin, Chongqing, China - **Tel:** +86-23-85575926 | **Fax:** +86-23-85575930 - **Website:** [www.nakinoilpurifier.com](http://www.nakinoilpurifier.com) --- **If you have any questions, please feel free to contact us.**

Electric Reach Forklifts

Electric Reach Forklifts,Electric Reach Forklift,Walkie Reach Truck,Electric Reach Truck Forklift

Jiangsu Lundi Forklift Co.,Ltd. , https://www.lundilift.com