AH: 2-axis automatic feedÂ
hydraulic automatic longitudinal feed
electronic automatic cross feed
manual rapid up and down feedÂ
2. Parameters
| Parameters | Unit | KGS1024AH | |
| Working Surface of Table | mm | 255×610 (10"×24") | |
| Max.Table Travel | mm | 660 | |
| Max.Cross Travel | mm | 280 | |
| Distance Between Table Surface and Spindle Center | mm | 535 | |
| Max.Table Load | kgs | 300 | |
| T-Solt(Number×Width) | mm | 1×14 | |
| Table Speed | m/min | 5~25 | |
| Crossfeed Handwheel | 1gard | mm | 0.02 |
| 1Â rev | 5 | ||
| Automatic Crossfeed of Saddle | mm | 0.5~12 | |
| Power Cross Feed | 50HZ | mm/min | 790 |
| 60HZ | 950 | ||
| Grinding Wheel Dimensions | mm | 200×25×32/31.75 | |
| Spindle Speed | 50HZ | rpm | 2850 |
| 60HZ | 3420 | ||
| Vertical Handwheel | 1gard | mm | 0.01 |
| 1Â rev | 2 | ||
| Automatic Down Feed Rate | mm | - | |
| Power Head Increment | mm/min | - | |
| Spindle Motor | kw | 2.2 | |
| Vertical Motor | w | - | |
| Hydraulic Motor | kw | 1.5 | |
| Dust Collection Motor | w | 550 | |
| Coolant Motor | w | 90 | |
| Crossfeed Motor | w | 60 | |
| Floor Space | mm | 1900×2400 | |
| Packing Dimensions | mm | 2090×1680×2135 | |
| Net Weight | kgs | 1700 | |
| Gross Weight | kgs | 1950 | |
3. Main Configuration of Grinding Machine
1. Spindle motor: ABB brand.
2. Spindle bearing: NSK brand P4 grade precision ball bearing which from Japan.
3. Main electrical components: SIEMENS brand.
4. Main hydraulic components: brand from TAIWAN.
Â
4. Standard Accessories      Â
| 1 | Grinding wheel | 2 | Wheel flange |
| 3 | Wheel balancing base | 4 | Wheel balancing arbor |
| 5 | Extractor | 6 | Diamond dresser |
| 7 | Leveling pad | 8 | Anchor bolt |
| 9 | Tool box with tools | 10 | Electric magnetic chuck   |
| 11 | Cooling system | 12 | Working light         |
 5. Optional Accessories
| Serial No. | Name of Article |
| 1 | rear splash guard         |
| 2 | DRO (digital read out) |
| 3 | overhead parallel dresser  |
| 4 | hydraulic tank oil cooling |
| 5 | cooling & suction device    |
| 6 | magnetic separator        |
| 7 | cooling magnetic paper filter |
| Note | 6 and 7, select one just OK. |
6. Feature
1. Well designed cast iron structure provides excellent dampening
2. Flange mount spindle cartridge for superior side grinding rigidityÂ
3. Grinding spindle features low-maintenance preloaded high precision angular ball
bearings(NSK P4 grade)
4. "V" and flat type guide way which precision hand scrapped turcite saddle ways for smooth and long lasting performance
5. Table guideways are hardened, ground and counter-laminated with PTFE(TEFLON) to ensure high wear-resistance
6. Centralized automatic lubrication system ,supplies oil to guide-ways and lead-screws as the machine operates. This system ensures all the critical components are lubricated with the right amount of oil at all times
7. Separate hydraulic tank prevents heat and vibrations from being transferred to the machine
8. Electric components and functional modules are well arranged and packed in the electric  cabinet, making maintenance and trouble-shooting easily accessible
9. Safety 24V control circuit power
7. Company & Factory
Nantong Kaite Machine Tool Co., Ltd.Â
A Sino-US joint venture machine tool company with KENT INDUSTRIAL (USA) INC.Â
KAITE specializes in manufacturing precision surface grinding and milling machine since 1999.
KAITE supply the USA quality machines and with China price. Â
KAITE is located in Nantong city, Jiangsu Province where near Shanghai city and welcome to visit us!
8. Delivery Picture
 1. PictureÂ
AH: 2-axis automatic feedÂ
hydraulic automatic longitudinal feed
electronic automatic cross feed
manual rapid up and down feedÂ
2. Parameters
| Parameters | Unit | KGS1024AH | |
| Working Surface of Table | mm | 255×610 (10"×24") | |
| Max.Table Travel | mm | 660 | |
| Max.Cross Travel | mm | 280 | |
| Distance Between Table Surface and Spindle Center | mm | 535 | |
| Max.Table Load | kgs | 300 | |
| T-Solt(Number×Width) | mm | 1×14 | |
| Table Speed | m/min | 5~25 | |
| Crossfeed Handwheel | 1gard | mm | 0.02 |
| 1Â rev | 5 | ||
| Automatic Crossfeed of Saddle | mm | 0.5~12 | |
| Power Cross Feed | 50HZ | mm/min | 790 |
| 60HZ | 950 | ||
| Grinding Wheel Dimensions | mm | 200×25×32/31.75 | |
| Spindle Speed | 50HZ | rpm | 2850 |
| 60HZ | 3420 | ||
| Vertical Handwheel | 1gard | mm | 0.01 |
| 1Â rev | 2 | ||
| Automatic Down Feed Rate | mm | - | |
| Power Head Increment | mm/min | - | |
| Spindle Motor | kw | 2.2 | |
| Vertical Motor | w | - | |
| Hydraulic Motor | kw | 1.5 | |
| Dust Collection Motor | w | 550 | |
| Coolant Motor | w | 90 | |
| Crossfeed Motor | w | 60 | |
| Floor Space | mm | 1900×2400 | |
| Packing Dimensions | mm | 2090×1680×2135 | |
| Net Weight | kgs | 1700 | |
| Gross Weight | kgs | 1950 | |
3. Main Configuration of Grinding Machine
1. Spindle motor: ABB brand.
2. Spindle bearing: NSK brand P4 grade precision ball bearing which from Japan.
3. Main electrical components: SIEMENS brand.
4. Main hydraulic components: brand from TAIWAN.
Â
Sanitary Butterfly Valve is also called as hygienic Butterfly Valve which is a type of flow control device, used to make a fluid start or stop flowing through a section of pipe.Sanitary Butterfly Valves service the Bakery, Beverage, Cosmetic, Dairy, Food and Pharmaceutical Industries.
Detailed Product Description:
1. Name: Sanitary Stainless Steel Butterfly Valve
2. Size: 1"-8", DN25-DN200, larger size can be customized
3. Material: SS304, SS316L
4. Standard: DIN, SMS, ISO, 3A, RJT, IDF
5. Connector: weld, thread, clamp, flange
6. Power: Manual, Pneumatic, Electric
7. Application: Beer, Milk, Beverage, Food, Pharmacy etc
FAQ:
1.Are you a trader or manufactory?
We are a manufactory (Own Forging workshop and CNC machining workshop )
2.Can your products reach to FDA , CE and 3A requirements?
Yes, all of our material can reach to the requirements of FDA, ISO and 3A Certificate).
3.We can supply:
Sanitary Butterfly Valve, Sanitary Check Valve and Diaphragm Valves, as well as Various Tank Accessories: Sight Glass, Strainers/Filter, Cleaning Ball, And other Pipe Fittings , (Pipe Unions: SMS, DIN, IDF, RJT, 3A,DS; Fittings: Ferrule,Elbow, Tee, Reducer and all other Non-standrad fittings), each products are tested well by our strictly Quality Control System, and we also have excellent service to support you and promote your business.
4.Lead Time:
For large quantity, as usual, it can be sent out within 20-40 days.
Small parcel will be dispatched by DHL, FedEx, UPS OR TNT Courier.
Big cargo will be delivered by Air freight or By Sea.
5.Our Service:
About payment:
Payment methods: L/C, T/ T, Paypal,Western Union
6.About samples:
We can provide samples production and service. Usually 2 to 5 days, the sample can be sent to your hands. We will choose the shipping way as you required: By sea, by air or by express. Any question about samples, please contact us.
7.For OEM products:
We will finish the production within 20-40 days after payment has been confirmed.
About delivery and shipping:
We will choose the delivery way as you required: By sea, by air, by express ect. Save your cost is our mission.
8.Warranty:
Any question or problem will be respond within 12 hours.
9.Lifetime service:
Any problem happened to our product, we will do our best to help client to solve it, spare parts will be half price in lifetime.
10.Problem solve:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then back to you.
11.Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified product.
12.Purpose:Attitude is everything.
Sanitary Butterfly Valve
Butterfly Valve,Control Valve,Stainless Steel Butterfly Valve,Stainless Steel Sanitary Butterfly Valve
Wenzhou Qili Fluid Equipment Co., Ltd. , http://www.qlssvalve.com