Skip to content

September 04, 2019

Which test instrumentation is required for the five-grade test-type power facility permit?

1. High pressure test equipment:

50kV/5kVA high voltage test transformer 1 set (transformer, control box, voltage regulator);

Each set of 60kV/4mA DC high voltage generator (tester, supporting line);

50kV AC/DC voltage divider 1 (voltage divider, matching voltmeter);…

September 04, 2019

Consolidate and increase grain production capacity, and improve the addition and subtraction of corn pig milk

[China Agricultural Machinery Network Industry News] In 2015, the agricultural situation was gratifying, the grain achieved a 12-year increase, and the farmers' income exceeded the million yuan mark. The agricultural situation is good and it provides str…

September 04, 2019

Truck and environmental protection hand in hand together into the 2016 Capital Environmental Exhibition


On April 7, the 17th Environmental Sanitation Exhibition in 2016 and the China (Beijing) International Exhibition on Environmental Protection, Sanitation and Municipal Cleaning Equipment and Facilities were held at the National Agricultural Exhibition Hall.

…

September 03, 2019

Plant protection drone market huge and efficient intelligence is the trend

[China Agricultural Machinery Industry News] With the acceleration of the fourth industrial revolution Industry 4.0 process and the development of agricultural modernization, the agricultural machinery industry has become increasingly intelligent, and the ba…

September 03, 2019

18TB hard disk drive will soon become a reality

According to a new report, the use of Xenon hard drives will drive storage capacity up to 18TB in just two or three years. Storage research firm TrendFocus estimates that drive manufacturers will be able to separat…

September 03, 2019

The aging of the population forces China's agriculture to turn to intelligence

[China Agricultural Machinery Industry News] As the saying goes, "Small and strong do not raise children, the boss is sad." According to statistics released by the National Bureau of Statistics, China's total population exceeded 1.36 billion in…

September 02, 2019

What is AHD HD Car Monitor Yuhong First AHD Onboard Monitor

What is AHD onboard monitor? Yuhong pioneered the AHD HD car monitor, which can directly AHD million HD camera signal, enter a new high-definition mode, color, clarity into a new stage, Yu Hong more secure, has been imitated never been exceeded.
…

September 02, 2019

What safety issues should be observed when operating the instrument lathe?

1. When installing the chuck, tighten the locking screw on the spindle so as to avoid accidents due to slippage during driving.

2. Check whether the rotation of the knife holder is normal, whether the positioning is accurate, and whether the quick…

September 02, 2019

Dongfeng Liuqi LongH7 equipped with Weichai WP13 high-powered departure

In the first quarter of 2016, Dongfeng Liuzhou Automobile Co., Ltd. took the Weichai WP13 engine and took a large number of orders at various conferences. As a flagship product of the Dragon H7 series, the Long H7 is equipped with a …

September 02, 2019

Which brand of home central air conditioner is good and what is the price?

Home-installed central air-conditioning has the advantages of comfort, beauty, and energy saving. In Changsha, home air conditioning is used for cooling and heating. The frequency of use is high and comfort is good. Which Changsha home central air-conditioning bran…

September 02, 2019

Get rid of the manual charging of Internet of Things product RFID self-charging technology has a new breakthrough!

There was an article: “The weakness and the way out of smart hardware from the Nest smoke alarms.” Finally, the article pointed out that the smart hardware, or is the biggest obstacle to the Internet of Things products: they are more than enough, less durable. Often these products …

August 31, 2019

Development of CNC System for CNC Flame Cutting Machine Based on PMAC

1 Introduction In recent years, the use of industrial PCs for machine tool control and the development of general-purpose CNC systems under the Windows operating system have become a new trend in the development of CNC technology. There are two ways to implement the CNC system under the Win…

147条记录/13页 上一页 11 12 13 下一页
Home
Recent Posts
  • High-temperature sterilization pot c…
  • On Cloud Computing Technology Princi…
  • What are the benefits of a 10-square…
  • What types of mobile advertising veh…
  • The use of multifunctional dust supp…
  • Mobile ice cream truck sales, a good…
  • Mobile Ice Cream Wagon Lets You Cool…
  • 10 tons of refueling vehicles how mu…
  • Winter Crane Maintenance Tips
  • Analysis of Comprehensive Structure …
  • What are the characteristics of fuel…
  • What are the safety measures for saf…
  • What are the conveniences of small m…
  • How to Protect Tanker Tyres at High …
  • Ultramicro crusher enters the climax…
  • · China plans to develop autonomous…
  • LCD splicing screen application anal…
  • How to maintain the tanker filter?
  • Precautions when driving a refueller
  • How to prevent the volume loss of th…