Cheng Li Motors, as a manufacturing vehicle manufacturer of state-approved fixed-point production special vehicles, can not be underestimated as a manufacturer of special-purpose vehicles. At the same time, Cheng Li also produced different series of special models, and many Dongfeng special-purpose vehicles are also in Cheng Li. As a special automobile manufacturer, Cheng Li’s models are generally quite good. Then, let's talk to the riders about the overall performance of the Chengli tank truck .
From the picture, we can see in detail that the Chengli tank truck is mainly composed of tanks, breathing valves, chassis, power take-offs, and oil pumps. In general, the tank structure of Chengli tank trucks is mostly elliptical, and its materials are relatively high-quality steel plates. This can effectively ensure the safety of tanks for transport vehicles. The internal tank structure is divided into two types, one is two positions and four rooms, and the other is more than warehouses and multiple rooms. There will be anti-wave partitions between each bin, so that the partition can effectively reduce the impact of oil on the car.
Secondly, let's take a look at the breathing valve of the Chengli tank truck . In order to ensure the safety performance of the vehicle during working and transportation, the internal pressure and atmospheric pressure of the tank truck are basically kept in a consistent state. When the amount of oil inside the tank expands due to heat, the oil level will rise as the pressure increases, and the upper valve of the breathing valve will open. Conversely, when the amount of oil inside the tank contracts due to cold, the lower valve of the breathing valve opens when the pressure becomes lower.
The power take-off device of the Chengli tank truck is matched with the chassis gearbox, so that it will be relatively simple during the specific operation process, and it will not produce some bad influences. The pump has a self-priming centrifugal pump and gear pump for users to choose from, delivery hose in the treatment of choice is a rubber ring seal, disassembly is more convenient, and the sealing performance is quite good.
Our robots are specialized in Metal press lines, through automatically feeding ,discharging the hardware products to reach all positions automation, saving the labour and avoid the dangerous and harmful conditions. Fully realize the automation of the production process. Suitable for single, multiple way drawing, annealing, trimming, beading and other process. To be combined into production line according to different products and procedures.
We provide process automation solutions of hardware industry, network of research and development design, manufacturing, assemblage, sales, service.
Automatic Multi-channel Processing Robot
Metal Press Robot,Quality Mechanical Arm,Industrial Robot
Shantou Sunshine Automation Equipment Co.,Ltd. , http://www.stjsrobot.com