Infrared Rework Station, BGA Rework Station, Rework Station T-862++, Soldering Tool, Repair Tool, BGA Repair

• Model NO.: T862++
• Trademark: Puhui
• Specification: 220V/110V 50-60HZ
• HS Code: 85151100

• Color: Black
• Transport Package: Carton Size: 46*34*30.5cm Gross Weight: 9kg
• Origin: Tai′an City, Shandong Province, China

Infrared BGA Rework Station, smd Rework Station T862++,mobile phone rework station, bga repair,bga reballing




Technical parameters

Power: 800W
Voltage: AC110V-220V 50/60HZ
Infrared lamp body power: 100W
Preheating plate power: 450W
Working bench size: 360*270mm
Infrared lamp body heating size: 35*35mm
Preheating plate size: 120*120mm
Preheating plate temperature range: 450
Infrared lamp body temperature range: 100-350

1. Infrared welding technology which was developed independently.
2. Infrared heating is easy to pierce and distribute evenly, can avoid the IC damage due to the fast or uninterrupted heating up.
3. Easy operate; User can operate skillfully after one-day training.
4. No need welding tools, it can weld any chips under 35mm (T-862++).
With hot melt system, preheating range 120*120mm (T-862++).
5. It doesn't impact the smart parts without hot air, and suits to weld all kinds of chips, especially Micro BGA components

.

==================== Other Notice ====================

Payment:

* We accept ESCROW and alipay here. 

* We also accept T/T, Western Union, MoneyGram, etc

Shipping:

·         We do not ship this product by Singapore /HK/ China Post Air Mail. Because it is hard to track and takes more time. Especially, it is not so fafe.

·         We will use FedEx/DHL/UPS/TNT/EMS for fast and safe shipping. We will use the most convenient one when you buy the product.

·         Before shipping, we will pack every product well for you. And please check the outside package when you receive the parcel well

·         If you have special requirement for shipping, please let us know in advance.

 

Warranty : 

·         We provide 12 months Warranty for our products!

·         If you are not satisfied with our products when you receive them, please return it within 10 days for a replacement or money back. Please contact me before you return it.

·         If item is defective in 1 months for product reason, we will send you a replaced spare part without extra charger, or offer refund after we receive the defective item.

·         If item is defective after 1 months, you can still send it back to us. We will fix it for you free of charge and send it back to you, but you should bear the shipping cost..

SLA-Stereo Lithography Appearance technology, using photosensitive resin 3-D printing materials: milky white texture, good strength, but relatively small toughness, small and thin brittle fracture, but easy to grind, electroplating, painting and coloring. Photosensitive resin is composed of two parts, namely photoinitiator and resin (resin consists of prepolymer, diluent and a small amount of additives). The amount of photoinitiator and diluent has an important influence on the curing speed and quality of photosensitive resin. When the proportion of photoinitiator and diluent is appropriate, not only the curing speed is fast, but also the curing quality is good. Therefore, in order to select large brand manufacturers, mature and stable photosensitive resin 3D Printing materials are very important. In terms of performance, there are also some imported photosensitive resin materials with high strength, transparency, high temperature resistance, moisture resistance and waterproof functions. In addition, three-dimensional printing materials of composite ceramics, such as alumina (AI2O3) m zirconia (ZRO2), hydroxyapatite (HAP), tricalcium phosphate (TCP) and so on, which are similar to high-resolution ceramic powder and photosensitive resin, can be selected. 

SLS-Selective Laser Sintering technology, using 3D printing materials: PA Series Nylon 3D Printing Material: Abrasion Resistance, High Strength and Stiffness, Good Chemical Resistance, Excellent Long-term Invariant Behavior, High Selectivity and Detailed Analysis, Biocompatibility in accordance with EN ISO 10993-1 and USP, and in accordance with EU Plastics Directive approved for food contact. Typical applications of this material are the highest quality of fully functional Plastic Parts. But the surface is relatively rough. There are also PA3200GF nylon fiberglass materials for deep drawing dies or any other applications requiring specific stiffness, high thermal deformation temperature and low wear; typically used in aluminium-filled nylon materials for metallic appearance and thermal load parts. At present, desktop LS laser sintering PA12 nylon powder material is also an option. 

SLM Selective Laser Melting technology,Under the irradiation of high density laser energy, metal powders can be completely melted. After cooling, they can be shaped and welded. It is through this process that SLM technology forms the 3d model layer by layer.SLM technology can print stainless steel, die steel, cobalt chromium alloy, titanium alloy, aluminum alloy, copper alloy, nickel base alloy powder, etc.It can print metal parts with complex structure to help shorten product development cycle and reduce R & D cost.

3D Printing

3D Printing,Electric Tool,Rapid Prototype,3D Printing Stereolithography

Ningbo Expert Mould Plastic Co., Ltd. , https://www.prototypesmaker.com