In order to make the metal tube float flowmeter work normally and achieve a certain measurement accuracy, Xiaobian here reminds everyone to pay attention to the following points when installing the flowmeter:
1. The metal tube float flowmeter must be installed vertically on a vibration-free pipe. The fluid flows through the flowmeter from bottom to top, and the perpendicularity is better than 2°, and the horizontal angle is better than 2° when installed horizontally;
2. In order to facilitate the repair and replacement of the flowmeter and the cleaning of the measuring pipeline, the metal pipe float flowmeter installed on the process pipeline shall be equipped with a bypass pipe and a bypass valve;
3. The inlet of the metal tube float flowmeter shall have a straight pipe section with a length of 5 times or more, and the outlet shall have a straight pipe section of 250 mm;
4. If the medium contains ferromagnetic substances, a magnetic filter should be installed; if the medium contains solid impurities, consider adding a filter between the valve and the straight pipe section;
5. When used for gas measurement, ensure that the pipeline pressure is not less than 5 times the pressure loss of the flowmeter to stabilize the float;
6. In order to avoid the deformation of the flowmeter caused by the pipeline, the flange of the process pipeline must be coaxial with the flange of the flowmeter and parallel to each other. The pipeline supports to avoid the vibration of the pipeline and reduce the axial load of the flowmeter. The valve should be installed downstream of the flowmeter:
7. When measuring gas, if the gas directly discharges the atmosphere at the outlet of the flowmeter, the valve should be installed at the outlet of the meter, otherwise the air pressure will drop at the float and cause data distortion.
8. When installing the PTFE-lined instrument, do not loosen the flange nut too tightly to avoid deformation of the PTEF lining;
9, with a liquid crystal display instrument, try to avoid direct sunlight display, so as not to reduce the life of the liquid crystal; with lithium battery-powered instruments, try to avoid direct sunlight, high temperature environment (≥ 65 ° C) to avoid reducing the capacity of lithium batteries and life.
Metal tube float flowmeter maintenance method:
1. The instrument must be cleaned, especially the surface of the plate, the surface of the spinal canal and the float must be kept clean. Therefore, the instrument should be removed after use for a period of time.
2. The two covers of the indicator must be sealed to prevent dust from entering and affect normal operation.
3. If the instrument is not stable, the main reason for the pointer to jump besides the pulse of the flow itself, but also the possibility that the medium has two-phase flow (ie, the liquid phase and the gas phase exist simultaneously), as long as measures are taken to eliminate the existence of the two-phase flow, The instrument can be operated stably.

Al-alloy Lift Platform

The AL-alloy lift platform also called Al-Alloy Mast Hydraulic Lift, it can be Single mast aluminum Aerial Work Platform, double mast hydraulic lift

Our hydraumatic lifting are designed for aerial access applications, from the minimum 1.5 meters reach height up to 16 meters reach height available, with different sizes and heights, these scissor lifts enable you to reach the most hard-to-access overhead spaces.

The manually propelled Hydraumatic lifting can do many jobs such as, steel structural warehouse construction, building maintenance, lamp repairing, Street Lighting Repair, Painting, Construction etc.

We offer many different power sources for our Hydraumatic lifting, including but not limited to 220v single phase, 380v three phase, 110v single phase, or even a 24V DC battery powered model.

Al Alloy Mast Hydraulic Lift

Features:

Emergency stop button

Charge lamp

Double Controller Operation

Emergency descent PLB

Limit switch

Level indicator

Overload limit

Maximum working height: 8 m, 10 m and 12 m three kinds of models for your choice

Small size (1.42 m * 0.84 m) ensures work in a smaller space

Precise level display device ensures the accurate and reliable leveling operation.

aluminum aerial work platform


Single mast aluminum work platform

Model

Working Height

(m)

Platform Height

(m)

Capacity

(kg)

Dead Weight

(kg)

Closing Size

(mm*mm*mm)

Power Source

Motor

SHJ1-5

5

3.5

100

180

1100*830*1900

220V 50Hz

single phs

1.5kw

SHJ1-6

6

4.5

100

220

1100*830*1900

SHJ1-8

8

6.4

100

260

1200*830*1900

SHJ1-9

9

7.4

100

320

1200*950*2100

SHJ1-10

10

8.4

100

357

1200*950*2300

SHJ1-12

12

10.2

100

400

1300*950*2300

SHJ1-13

13

11.3

100

420

1400*950*2300

SHJ1-14

14

12.2

100

450

1500*1000*2600

Double mast aluminum work platform

Model

Working Height

(m)

Platform Height

(m)

Capacity

(kg)

Dead Weight

(kg)

Closing Size

(mm*mm*mm)

Power Source

Motor

SHJ1-8

8

6.5

200

430

1500*900*1900

220V

50Hz

single phs

1.5kw

SHJ1-10

10

8.5

200

560

1500*900*2100

SHJ1-12

12

10.5

200

380

1500*900*2350

SHJ1-14

14

12.2

200

620

1600*1000*2600

SHJ1-16

16

14.2

200

820

1800*1000*3000

2.2kw

SHJ1-18

18

16.2

200

930

1800*1000*3100

Details


Single Mast Al Alloy Lift Platform aluminum aerial work platformSingle Mast Al Alloy Lift Platform

More for choice:

Al Alloy Mast Lift Platform

Aluminum Alloy Lift Platform

Aluminum Alloy Lift Platform,Aluminum Alloy Lifting Table,Aluminum Alloy Lifts,Man Lift

Jiangxi Mide Industrial Co., Ltd. , https://www.midecrane.com