Pz Vertical Gravity Bottom Discharge Centrifuge

Name:PZ bottom discharge centrifuge
Other Name:Bottom centrifuge
Selling Point:simple structure, convenient operation, continuous operation,automatic operation
Simple Description:  

1. Vertical Bottom discharge
2. Liquid damping isolators, no installation foundation
3. Independent bearing seat, large bearing support span, low basket gravity center, larger carrying capacity
4. Fully-automatic operation program control
5. Automatic operation, continuous operation
6. Excellent dehydrating performance
7. Stable running even when the flow changes
8. No damage on article

Detailed Description:
Properties and uses:

1. It can be used to dehydrate the large articles over than 2mm, as well as to apart all kinds suspension that was difficult to separate. The grains are discharged automatic and will not be broken at random

Operating principle

1. The automatic bottom discharge scraper centrifuge is vertical fully-automatic filtration centrifuge. The motor drives the drum to rotate at high speed through the belt, and under the control of pre-written program, the material to be separated is fed into the drum through the feed system. After the material is filtered through the filtration medium ( filter cloth/screen) under the action of centrifugal force, the liquid phase discharges out of the centrifuge through the liquid pipeline, and the solid phase is retained in the drum. Once separation cycle is complete, the drum upraise and all articles are discharged by itself based on its gravity.

Main Characteristics

1. Novelty structure, convenient operation and maintenance.
2. Adopts with big cover structure, convenient to discharge the material and thoroughly was the space between the shell and drum.
3. The lid is quipped with a mechanical balancer, it is less labor cost and needs no energy.
4. No dead angle exists and completely transited smoothly, an optional washing effect can be achieved with a CIP cleaning system
5. Grains can be well preserved

Special Allocation

1. Cleaning and spraying system
2. PLC program control
3. Hydraulic action system
4. No basic form(equipped with vibration isolation chassis +vibration damper).
5. The corresponding stainless steel(SUS304,321,316L,or titanium) is adopted according to anticorrosive requirements for users' materials to be separated.

Product Parameter:
 




  Name:PZ bottom discharge centrifuge
Other Name:Bottom centrifuge
Selling Point:simple structure, convenient operation, continuous operation,automatic operation
Simple Description:  

1. Vertical Bottom discharge
2. Liquid damping isolators, no installation foundation
3. Independent bearing seat, large bearing support span, low basket gravity center, larger carrying capacity
4. Fully-automatic operation program control
5. Automatic operation, continuous operation
6. Excellent dehydrating performance
7. Stable running even when the flow changes
8. No damage on article

Detailed Description:
Properties and uses:

1. It can be used to dehydrate the large articles over than 2mm, as well as to apart all kinds suspension that was difficult to separate. The grains are discharged automatic and will not be broken at random

Operating principle

1. The automatic bottom discharge scraper centrifuge is vertical fully-automatic filtration centrifuge. The motor drives the drum to rotate at high speed through the belt, and under the control of pre-written program, the material to be separated is fed into the drum through the feed system. After the material is filtered through the filtration medium ( filter cloth/screen) under the action of centrifugal force, the liquid phase discharges out of the centrifuge through the liquid pipeline, and the solid phase is retained in the drum. Once separation cycle is complete, the drum upraise and all articles are discharged by itself based on its gravity.

Main Characteristics

1. Novelty structure, convenient operation and maintenance.
2. Adopts with big cover structure, convenient to discharge the material and thoroughly was the space between the shell and drum.
3. The lid is quipped with a mechanical balancer, it is less labor cost and needs no energy.
4. No dead angle exists and completely transited smoothly, an optional washing effect can be achieved with a CIP cleaning system
5. Grains can be well preserved

Special Allocation

1. Cleaning and spraying system
2. PLC program control
3. Hydraulic action system
4. No basic form(equipped with vibration isolation chassis +vibration damper).
5. The corresponding stainless steel(SUS304,321,316L,or titanium) is adopted according to anticorrosive requirements for users' materials to be separated.

Product Parameter:
 




 

NG Nitrogen Generator

NG Nitrogen Generator,PSA Nitrogen Generator,PSA N2 Generator,Industry NG Nitrogen Generator

Sports Floor,Plastic Floor Co., Ltd. , http://www.nbgenerator.com