On February 19th, the US Department of Commerce issued an announcement to initiate an anti-dumping and anti-subsidy merger investigation on imported truck and bus tires originating in China.
The head of the Trade Relief and Investigation Bureau of the Ministry of Commerce of the People's Republic of China said in a statement that the US Department of Commerce's decision to file a case lacks factual and legal basis, especially the applicant's qualifications and industrial representation have serious problems. The case was filed by a US trade union organization, and some major tire companies in the United States did not support filing.
The person in charge also pointed out that the production and operation of the US tire companies are in good condition. Under this circumstance, the US still launched a "double-reverse" investigation on the above products, and China expressed serious concern about this.
It is understood that since 2007, the US has initiated trade remedy investigations on a number of tire products originating in China, and adopted restrictive measures, which have caused serious obstacles to the normal export of Chinese tire products to the United States and caused the interests of the Chinese tire industry. Tremendous influence. The Chinese tire industry has responded strongly.
The relevant person in charge of the Ministry of Commerce of China stated that the Chinese government will pay close attention to the progress of the case and resolutely use the WTO rules to safeguard the legitimate rights and interests of the Chinese tire industry.
The person in charge also stressed that China has consistently opposed the abuse of trade remedy measures and hoped that the US would handle the case prudently and avoid affecting the normal trade and good cooperation between the two industries.
Solenoid Armature makes an very important role in complete Solenoid Valve compared to other solenoid valve parts, so the quality of the armature directly related to the life of complete solenoid valve. Hereby, let me introduce how we control armature quality from character of raw material and how we produce during production.
We also called solenoid armature as solenoid valve armature, solenoid valve stem, solenoid valve core, solenoid Plunger Tube Assembly, solenoid armature tube assembly, Solenoid Armature Assembly, Electromagnetic Valve armature, etc, but all in all, the solenoid armature looks like an opener and closer even like a head in the solenoid valve.
The armature can be divided into four parts roughly, they are fixed core(who with or without shading ring depending on DC or AC voltage type), plunger tube and tube base(has option of stainless steel and brass), mobile plunger(installed with inner and outer spring, top and bottom seal).
The fixed core and movable plunger are made of high magnetic stainless iron, such as 430FR, has good performance of attraction and rust-proof. During production, we doing inspection after each procedure.
The plunger tube is made of H62 brass or seamless 304 stainless steel, the wall thickness from 0.20mm to 2.5mm available. All raw material is inspected before put them into our warehouse.
The plunger tube base is made of H59 brass or 304 stainless steel, with high performance, also we inspected each lot before put them in warehouse.
According to application requirement, choose suitable welding to connect each part, such as laser soldering, argon-arc welding, silver soldering.
The seal can be NBR, Viton, EPDM, Silicon, Teflon, etc. All can be customized as your requirement.
Except this,we also sale for Auto Drain Valve , Air Suspension Valve ,solenoid armature assembly, Forged Brass Valve .
Welcome your any inquiry, we can produce as per your requirements.
Solenoid Armature, Solenoid Stem,Plunger Tube Assembly,Auto Drain Valve,Air Suspension Valve,Solenoid Armature Assembly,Forged Brass Valve
NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com