On October 22nd, the successful ceremony of the world's first 36,000 cubic meters LEG star three-body tank hydraulic test was held at Qidong Pacific Offshore Company (SOE).
It is reported that Mr. Jan-lars Kruse, General Manager of Ship East Hartmann, Mr. Ulrich Adami, General Manager and Technical Director of the fleet, Ms. Hou Juzhen, Director of Marketing Department of DNV-GL Greater China, Mr. Falk Rothe, General Manager of Greater China District Examination Center, Hamburg, Germany Mr. Mattias Malinowski, liquid tank expert in the review center, and Mr. Cai Yong, general manager of SOE attended the ceremony.
In May last year, SOE and Ocean Yield signed a contract for the construction of three 36,000-cubic-meter LEG ships, which were jointly built by Pacific Offshore and Pacific Shipbuilding. The ship adopts a newly designed star three-body tank, which is like the shape of "combined triplets". It is the largest independent C-type tank in the world. The unique and innovative design can increase the cargo capacity of the ship by 30%, while improving efficiency and achieving energy saving, environmental protection and environmental friendliness. In the process of building new tanks, SOE has set up a special research team through cooperation with international famous companies such as Hartmann and AC-INOX, which overcomes many difficulties in welding and construction accuracy of Y joints. The water pressure of the first tank has been successfully completed. test.
The construction of the world's first 36,000m3 star three-body tank liquefied gas carrier marks SOE's ambition to reinforce the liquefaction of liquefied gas carriers and strengthen the future development and market of SOE while consolidating the market leader in small and medium liquefied gas carriers. Development is of great significance. SOE will continue to work with all parties to ensure that the new series of ships will be delivered on schedule.

Graphite Broken

Chopped Graphite/Graphite Electrode in different materials have different definition of graphite pieces, some data and literature is not very big graphite particles are called graphite pieces (such as Graphite Powder) some is graphite products have a certain size, for graphite broken into patches, we here say of graphite for a second, usually called graphite blocks. Graphite is produced from graphitization and machining process of graphite products. It is used as additive and conductive material in the manufacture of graphite waste in steel and foundry industries, and can also be processed according to customer's requirements. They are also widely used in electric arc furnaces (steelmaking) and electrochemical furnaces (metallurgical and chemical industries).

Main use of graphite

Graphite pieces due to its low ash content, conductive and heat conduction performance is good, so there are a wide range of USES, can be added to the formula of less ash or dust products, graphite broken broken into small particles commonly use. Ingredients to add a certain amount of graphite, the plastic paste after kneading, especially during extrusion can reduce the friction resistance paste to squeeze the mouthpiece, to improve the coefficient of pressure type. Graphite pieces of coal adsorption properties of asphalt is better, to join the carbon block can rise to reduce the "short" waste (i.e., the product after roasting top produce honeycomb structure), and can improve the thermal conductivity of the carbon block and alkali corrosion resistance. The electrode paste used in hermetically-sealed thermal furnace is added to a certain amount of graphite to increase the conductivity and thermal conductivity of the electrode paste and accelerate the sintering speed of electrode paste. When the graphite is ground into small particles or fine powder, it is also used as raw material for the production of graphite chemical equipment (such as graphite-resin tubes). The graphite can also be used as a carbon addition agent for the electric furnace.

Graphite classification

1. Raw and broken. It is a raw blank that is not qualified after molding.

2. Roasting is the cutting debris that is recovered after the roasting of raw billet and after inspection of unqualified waste and the processing of calcined products.

3. The graphite is broken, and it is inspected by the graphite-producing waste and the cutting debris produced by graphite products in the process of processing.

Graphite Broken

Graphite Broken,Broken Graphite Electrode,Graphitized Anode Broken,Graphite Tablets

Fengcheng Ruixing Carbon Products Co., Ltd , https://www.lnfcrxts.com