When a wrecker performs work, if the problem of engine overheating is met, if it is well handled, then it is very useful for the road traffic safety of the wrecker, if you want to Good for better traffic flow along the road, first of all, it is necessary to improve the performance of the key parts of the vehicle. If the wrecker is overheated when it is working, it will cause great damage to the engine of the vehicle. How should we effectively handle the problem of sudden overheating of the vehicle on the expressway?  

When the wrecker was driving on the expressway, there was a sudden overheating of the engine's temperature. At this time, the temperature in the cab was very high. The first thing to do was to open all the windows and cool the wind. turn on. At this time, it is necessary to find a nearest service area to park the vehicle safely in a relatively cool shaded area, then open the hood of the engine, allow the wrecker engine to run idly, and slowly wait for the temperature of the engine to gradually The normal temperature is restored. Wait until the water temperature is normal and turn off the vehicle. Then, after waiting for a while, once again, after waiting for the engine's water temperature to fully decrease, the amount of cooling water of the engine under normal inspection is normal. If the amount of water is not sufficient at this time, then it is necessary to make up the cooling water to the relevant regulations. Then check the cooling system to see if there are no other faults before proceeding with the wrecker.  

If the engine temperature of the wrecker is a serious overheating, it is dangerous. At this time, it is not possible to take risks. If it is on a section with a relatively steep slope, the indicating needle of the water temperature gauge has already entered the dangerous area, it will only rise and will not fall, and it will repeatedly vibrate in the red area. Then it is very urgent to carry out emergency remedy immediately. Measures.


Hywell Machinery company proffesional to design and manufacture the Pulverizer Machine that include30B Universal Pulverizer,CSJ Coarse Pulverizer,WF Superfine Pulverizer , welcome to contact us and we will offer competitive price !

Pulverizer Machine main have three kinds final size materials Pulverizer (10-30mesh, 20-150mesh, 120-500mesh ). when customer want to get different kinds final size materials and capacity, we will recommend the different Pulverizer to reach customer requirement, the Pulverizer machine be made all stainless steel and the machine constraction also meet the requirements of GMP.

Pulverizer Machine

Pulverizer Machine,Universial Pin Mill, Universal Pulverizer, Coarse Pulverizer, Superfine Pulverizer

Changzhou Hywell Machinery Co,.Ltd , https://www.hywell-dryer.com