Cable Tray Roll Forming Machine
1. Machine Technical Data:
2. Main Components:
3. Working Flow:
Decoiler - Levelling - Servo Feeding - Punching - Main Roll Forming - Cutting - Runout Table
A. Passive Decoiler: To load and uncoiling material (We also have Electric Decoiler and Hydraulic Decoiler to hold the heavy material)
B. Servo Feeding Applicator: To feed the material accurately
C. Hydraulic/Press Punching: To punch as requirements
D. Roll Forming Unit: To roll form as requirements
E. Hydraulic Cutting: To cut sheets as desired length (We also have non-stop hydraulic cutting system)
F. Output Table: Support the finished products
4. Application:
In the electrical wiring of buildings, a cable tray system is used to support insulated electric cables used for power distribution and communication. Cable trays are used as an alternative to open wiring or electrical conduit systems, and are commonly used for cable management in commercial and industrial construction. They are especially useful in situations where changes to a wiring system are anticipated, since new cables can be installed by laying them in the tray, instead of pulling them through a pipe.
5. Advantages for Roll Forming Machine:
1. Reasonable Price
2. High Quality
3. 12 Months Warranty
4. More Than 10 Years Experience
5. Durable
6. Reliable
During the warranty period, maintain and change the spare parts for the customers for free (except for the instrument damage caused by human factors or natural disasters). And provide technical support for life-long. We can design and manufacture the machine according to clients' request! Our machines have passed CE, Guaranteed quality. Please send us the enquiry with Profile Drawing.
6. After-sale Service:
- The seller takes responsibility for installation and commissioning of the equipment and free training. After the machine arrives at the destination, by the request of the buyer, the seller will provide one technical engineer to guide installation and training, and the buyer should give the technical person full cooperation.
- Installation period: about 5 days after the complete preparation by the buyer such as the foundation and all necessary accessories.
- Training time: 5 days.
- Before departure of the engineers from the seller, the buyer should pay for installation and commissioning fee $100/day to the point account of the seller. The two-way ticket, visa, food, hotel, the translator and insurance are all to be provided by the buyer with full responsibility.
- The seller supplies technical data (including forming mold drawing, electrical elements drawing and equipment drawing etc).
7. Company Profile:
Wuxi Suhang Machinery Manufacturing Co., Ltd. is specialized in building materials of light steel structure. Since the factory was founded 10 years ago, it has always designed and produced various types of profiles of roll forming machines. The main products include Roller Shutter Door, PU Sandwich Panel Line, Pre-painted Steel Forming Machine, Racking Roll Forming Machine, Cable Tray Roll Forming Machine, Glazed Tile Forming Machine, Automatical C/Z Purlin Forming Machine, Floor Deck Forming Machine, Guardrail Forming Machine, Down Pipe Forming Machine, Whole Carriage Plate for Car Beam Unit, Steel Storage Unit, etc. The products are widely used in warehouses, factory buildings, supermarkets, nursing homes, villas, and other construction projects. Our factory can meet the growing demands of construction enterprises, automobile industry, and iron and steel production enterprises.
Suhang Machinery is located in Wuxi City, Jiangsu Province, which is close to Shanghai. It’s about half an hour’s journey. We enjoy the convenient transportation and advantageous location, which supply good business opportunities for buyers both home and abroad.
The interior rearview mirror can not only determine the distance from the vehicle behind, but also observe the vehicle behind when turning. In addition, it can effectively prevent rear end collisions and avoid scratches. For vehicles following closely behind your car, due to the presence of blind spots, the left and right rearview mirrors cannot be seen, and can only be seen through the inside rearview mirror.
| Items | Specifications | |
| Material of coil | Material Thickness | Grade 33 or grade 50 plain steel, galvanized steel, 304 stainless steel, 316 stainless steel, and aluminum |
| Width of the profile | 100-1000mm | |
| Height of the profile | 40-100mm | |
| Un Coiler | 5 tons hydraulic | |
| Forming system | Rolling Speed | 5-6m/min |
| Roller Stations | 20 stations | |
| Roller Material | Gcr 15 with quenching | |
| Shaft | Dia 90mm | |
| Main Motor Power | 22 kw | |
| Hydraulic cutting Power | 11 kw | |
| Cutting system | Material Of Cutting | CR12 with quench treatment |
| Hardness | HRC58-62 | |
| Tolerance | +/-0.05mm | |
| Electrical control system | Electric Source | 380V, 50HZ, 3 phase. Also can satisfy Customer's require |
| Control System | PLC (Panasonic) as list in the note | |
| Weight | About 18 tons | |
| Profile adjustment | Control by the motor | |
| Way Of Drive | 1 inch single chain | |
| Size of machine | Length 15000mm × Width 1800mm × Height 1000mm |
Item Name: |
Cable mounting system Roll Forming Line |
| Material: | Galvanize steel |
| Line Speed | 1.5-4m/min |
| Material Coil width | Per the design of product 100mm-800mm |
| Power | 380V 3phase or design according to client's request |
| Gram Weight: | Around 20 tons |
| Delivery time: | about 60 working days |
| MOQ: | 1 Set |
| Warranty | 1 year (12 months) |
Hongwen is a company that provides customized services for the production and sales of automotive parts. We have a dedicated attitude, create outstanding goals, pursue leading beliefs, shape the high-quality reputation of the enterprise, welcome cooperation with you, and jointly create a brilliant future.
The interior rearview mirror can not only determine the distance from the vehicle behind, but also observe the vehicle behind when turning. In addition, it can effectively prevent rear end collisions and avoid scratches. For vehicles following closely behind your car, due to the presence of blind spots, the left and right rearview mirrors cannot be seen, and can only be seen through the inside rearview mirror.
Our car mirrors are made of genuine glass material and undergo multiple polishing processes, giving you a broad view inside the car. Click here to learn about our car mirror products.
Related Suggestions: Car Mirror, Driver Side Mirror Assembly, Car Rear View Mirror, Car Side Mirror Hilux, Rear View Mirrors Hilux, Side View Mirror Toyota
Car Mirror,Driver Side Mirror Assembly,Car Rear View Mirror,Car Side Mirror Hilux,Rear View Mirrors Hilux,Side View Mirror Toyota
Danyang Hongwen Vehicle Industry Co., Ltd. , https://www.cn-hosc.com